Industrial automation & control
Αρχική                Εταιρία                Προϊόντα                Νέα/ Ανακοινώσεις                Επικοινωνία              
 
ΠΡΟΪΟΝΤΑ
 
Προϊόντα  >Herculine Actuators

Honeywell HercuLine 2000 Series Smart Precision Electric Actuators


HercuLine® 2000 series actuators combine the latest in microprocessor-based electronics with the unsurpassed reputation of dependability, durability and performance of HercuLine actuators. This combination provides for unequalled reliability, performance, installation savings, commissioning, operation and ongoing health monitoring for preventive maintenance. They are offered in three versions to suit your specific requirements. All versions offer high reliability, low maintenance and an exceptional warranty.

 

Features

  • Torque 50 to 400 in. lb. (6 to 45 N-M)
  • No burnout motor can be stalled up to 100 hours without damage to the actuator
  • NEMA 4X diecast aluminum enclosure; mounts in any position without degrading performance
  • Two end-of-travel electric limit switches are supplied as standard
  • HercuLine 2000 actuators are simple power to open, power to close actuators used for on/off positioning or 120/240/24 Vac to drive up/down position proportional with 135 or 1000 ohm feedback applications.
  • HercuLine 2001 actuators consist of the basic motor unit (BMU) plus digital electronics to provide for current or voltage proportional control, remote set-point control via Modbus or series 90 control. Optional HART communications.
  • HercuLine 2002 actuators are the enhanced motor units. They provide for current or voltage proportional control, remote set-point control via Modbus or series 90 control plus non-contact position sensing or slidewire emulation.
  • CE, UL, CSA Approvals

| General Brochure | Specification Sheet | Manual | Manual with HART
  



  

Honeywell HercuLine 10260A Series Rotary Actuator


Honeywell’s HercuLine® 10260A medium-torque industrially rated rotary actuator is engineered for exceptional reliability, accurate positioning and low maintenance.
Designed for very precise positioning of dampers and quarter turn valves, the 10260A performs especially well in extremely demanding environments requiring continuous-duty, high reliability, and low maintenance.Typical applications are furnace pressure dampers, gas/air valves, windbox dampers, coal mill dampers and more.

 



Features

  • High torque capability in small package : 10 to 300 lb-ft (14 to 400 N-M)
  • Duty Cycle : 100 % duty cycle motor
  • Enclosure Rugged, industrial grade enclosure
  • Control Signals : 4-20 mA, 1-5 Vdc, Position proportional (PAT), Open/close (contact closure)
  • Output Signals 0/4-20 mA, 0/1-5 Vdc (0-16 Vdc), and slidewire emulation.
  • Manual handwheel to operate the actuator when power is not available.
  • Two end-of-travel electric limit switches are supplied as standard. Up to 4 additional SPDT auxiliary switches are available.
  • CSA, UL and CE Approvals

| General Brochure | Specification Sheet |


Honeywell HercuLine 10260S Series Smart Precision Electric Actuator


Honeywell’s HercuLine® 10260S Smart actuators incorporate all of the high quality and reliable features of the traditional HercuLine® actuators plus the added benefits of a microprocessor-based enhanced electronics unit (EEU).
HercuLine 10260S Smart actuators enable operation at maximum process efficiency, minimal downtime, and access to all actuator parameters for real-time business decisions.
Honeywell’s 10260S actuators are industrial rated and engineered for very precise positioning of dampers and valves. The HercuLine 10260S performs especially well in extremely demanding environments requiring continuous duty, high reliability, and low maintenance. Typical applications are furnace pressure dampers, gas/air valves, windbox dampers, coal mill dampers, and more.

 

Features

  • High torque capability in small package : 10 to 300 lb-ft (14 to 400 N-M)
  • Continuous duty cycle motor. No burn out.
  • Non-Contact Position Sensing
  • High Accuracy –Typically 0.25% of 90° span.
  • High repeatability - Typically 0.2% of 90° span
  • Deadband – Deadband is programmable between the values of 0.2% to 5% of 90° span.
  • Enclosure Rugged, industrial grade enclosure
  • Control Signals – 0/4 to 20 mA, 0/1 to 5 Vdc, 0 to 10 Vdc, Digital remote setpoint (RS485 Modbus RTU protocol).
  • Output Signals – 0/4 to 20 mA, 0/1 to 5 Vdc and slidewire emulation.
  • Optional  Hart Communication
  • Manual handwheel to operate the actuator when power is not available.
  • CSA, and CE Approvals (UL Future)

| General Brochure | Specification Sheet | Manual


Honeywell HercuLink and HAL Software

Herculink Software
HercuLink™ software enables access to programming and communication functions using RS485/Modbus communications that is standard with the HercuLine 2001, 2002, 10260S and 11280S actuators. Using a laptop, desktop PC or a Palm PDA, HercuLink software with a RS232/485 converter allows you to configure, calibrate and access actuator information. By using this software, you can eliminate the added expense of the local keypad and display HMI. HercuLink software is designed to run on Windows 2000 or XP operating systems as well as on a Palm PDA.

HAL (Honeywell Actuator Linkage) software
HAL software helps size, select and install your Honeywell actuator. The software lets you choose the actuator and design the linkage that best fits your application.

| General Brochure | Herculink Software User Manual | Modbus RTU  Manual for Herculine Smart Actuators